High efficiency mowing boat effectively clean floating aquatic
plants in rivers
Performance Features:
Its structure adopts a 3-section rod design, which corresponds to
the front collection cabin, the middle
storage cabin with the rear storage and unloading cabin.A large
operation room is built above the middle
storage cabin, which is equipped with an integrat-ed operation
table. The captain can control the entire
boat for working while sitting inside the oper-ation room.
product parameters:
YSAH16 Large fully automatic cleaning boat with 3-section rod |
Technical specifications |
Size after assembly | 16x5x4.2 m |
Full load | 0.85 m |
Cutting width | 2.1 m |
Cutting depth | 1.2 m |
Hopper capacity | 16 CBM |
Driven mode | Wheel |
Driven speed | 4-5 km/h |
Continuous working time | 16 hours |
Engine power | 105 kw |
Working principle:
1. During working, the hydraulic system controls the hydraulic
cylinder to lower the front collection cabin
to go to under water; then bottom shear which in the front of cabin
starts working that driven by the hydraulic
motor. Its main function is to cut off the roots of the water
grass. There are 2 cir-cular saw blades on both
sides of the collection cabin, which rotate rapidly under the drive
of the hydraulic motor in order to cut the
horizontally growing water grass.
2. Not only can the branches and vines be quickly cut off, but also
the road for the cleaning boat to move
forward can be cleared. Then the 2 saw blades and the bottom shears
will work together with each other
to finish the first step of cutting and collecting. Then the
collection chain that locat-ed in the front cabin starts
to rotate under driven by the motor, at the same time the cut
aquatic plants are transferred to the storage
cabin to finish the collection work.
3. After the middle cabin and the rear cabin are fully filled with
the water grass or floating objects drive the
cleaning boat to the shore to unload. When unloading, the hydraulic
system drives the cylinder to lift the
rear unloading cabin higher then chain of the rear cabin will run
quickly, water grass or floating objects will
be unloaded to the shore.
In this way, the first time of cleaning work is completed, and then
the cleaning boat travels to the working
site for cycling work.
The large fully automatic cleaning boat is powerful and fully
equipped with different components for different
work requirement. It not only has standard bottom shears and saw
blades, but also has other functional
components for optional, according to conditions of aquatic plants
for clean-ing, such as collection rakes,
vertical shears, crushing knives, mechanical swing arms, wheel
knives and so on.
Company Profile
Shandong Yongsheng Dredging Machinery Equipment Co., Ltd. is
located in Ma Song Industrial Park, Huanglou
Street, Qingzhou City, Weifang City, Shandong Province, China.
Yongsheng was established in 1995, which
is a comprehensive manufacturer that integrating R&D,
production, sales and after-sales service. Designing
and manufacturing of cutter suction dredgers and aquatic weed
harvester are the company's main business.
Since its establishment, Yongsheng has wholeheartedly serves its
customers at home and abroad.
Based on understanding customers, listening to their opinions and
suggestions, Yongsheng designs and
improves its products in order to better develop the products that
meet customer's needs. All Yongsheng
products have got ISO9001 quality management system certification
and support SGS factory inspection
of goods.
Yongsheng is cling to customer-oriented and quality first, and has
always maintained cooperative relationships
with China Communications Construction Group Co., Ltd. and China
Railway Engineering Group Co., Ltd.
Our products have been exported to Malaysia, Russia, Mongolia,
Thailand, Vietnam, Singapore, Indonesia,
Fiji, Nigeria, Zimbabwe, Cameroon, Cote d'Ivoire, Ghana, Uganda and
other countries
contact me
wa 86 150 6343 7191
email lily@dredgerys.com
